Cold-climate heat pumps work in Foxfield, including on a 3°F winter design temperature nights, when they are sized and set up correctly. We design the system, pair it with backup heat where it makes sense, and line up every rebate your address qualifies for.
Licensed & insured • Family-owned since 2004 • Flat-rate pricing
✓ Upfront flat-rate pricing✓ Foxfield permits handled✓ Carrier, Lennox & Trane✓ All major brands serviced
Heat Pump Installation
Heat Pump Installation for Foxfield homes
Cold-climate heat pumps work in Foxfield, including on a 3°F winter design temperature nights, when they are sized and set up correctly. We design the system, pair it with backup heat where it makes sense, and line up every rebate your address qualifies for.
You get a flat price in writing before any work, and we will tell you plainly when a repair is not worth doing.
See our main heat pump installation page for how we approach this work across the metro.
Heat Pump Installation in Foxfield: what’s different here
Foxfield is CORE for electricity and Xcel for gas, so heat pump operating costs follow CORE’s rates. Long duct runs and detached outbuildings are common on its large lots.
Your rebates
Foxfield homes can stack no Xcel electric rebate, because CORE Electric offers thermostat credits rather than a heat pump rebate; the $1,500 Power Ahead Colorado rebate (pre-approval required); Colorado’s $1,000 air-source heat pump credit, at least a third of which the installer must pass to you as a line-item discount.
Cold performance
Cold-climate models hold most of their capacity down to 5°F. With a 3°F winter design temperature in Foxfield, we size to the heating load and usually keep the existing gas furnace as backup (dual fuel) for the coldest hours.
Electric service
CORE Electric Cooperative. Heat pump operating cost depends on that rate, so we run the numbers on your actual utility before you commit.
Hytek pricing
Heat Pump Installation: $6,000 – $15,000 before rebates. Flat-rate, approved before work starts. Free estimates on replacements.
Elevation & climate
5,807 ft. Avg January low 19°F, avg July high 87.3°F, design temp 3°F, about 49 in of snow a year.
Homes
Foxfield is almost entirely large-lot single-family homes built from the 1970s through the 1990s (median year built 1982).
Utilities
Electric: CORE Electric Cooperative. Gas: Xcel Energy.
Permits
Town of Foxfield (SAFEbuilt). Furnace, AC, water heater and gas fireplace work are One-Stop Permits, and new or relocated ductwork also needs a permit.
Rebates and programs for Foxfield homeowners (2026)
CORE Cool Credits: CORE Electric members with central AC or a heat pump earn bill credits for letting an eligible smart thermostat take part in summer demand events. Source
Arapahoe County Weatherization Assistance: Free efficiency work for income-qualified households, including furnace and water heater safety testing and furnace replacement where eligible (303-636-1982). Source
Power Ahead Colorado: $1,500 off a new ENERGY STAR cold-climate heat pump (ducted or ductless) in an existing home. Needs pre-approval through a Power Ahead-badged contractor before work starts; stacks with utility and state incentives. Source
Colorado heat pump tax credit: $1,000 for air-source systems in 2026, claimed by a registered contractor who must pass at least a third to you as an invoice discount.
Heat Pump Installation in Foxfield: common questions
How much does heat pump installation cost in Foxfield?
Our published range is $6,000 – $15,000 before rebates. Every Hytek job is quoted flat-rate and approved before work begins, so the price you agree to is the price you pay. Replacements get free in-home estimates; see the full HVAC cost guide for the other services.
Do I need a permit for HVAC work in Foxfield?
Repairs generally do not. Replacing or installing a furnace, AC, heat pump or water heater does. Permits for Foxfield addresses go through Town of Foxfield (SAFEbuilt). Furnace, AC, water heater and gas fireplace work are One-Stop Permits, and new or relocated ductwork also needs a permit. We pull the permit and schedule the inspection.
What HVAC rebates are available in Foxfield in 2026?
For heat pumps: no Xcel electric rebate, because CORE Electric offers thermostat credits rather than a heat pump rebate; the $1,500 Power Ahead Colorado rebate (pre-approval required); Colorado’s $1,000 air-source heat pump credit, at least a third of which the installer must pass to you as a line-item discount. Xcel’s gas furnace rebates ended Jan. 1, 2026, and the federal 25C credit does not apply to 2026 installs.
What heat pump rebates can I get in Foxfield in 2026?
no Xcel electric rebate, because CORE Electric offers thermostat credits rather than a heat pump rebate; the $1,500 Power Ahead Colorado rebate (pre-approval required); Colorado’s $1,000 air-source heat pump credit, at least a third of which the installer must pass to you as a line-item discount. The federal 25C tax credit ended for installs after Dec. 31, 2025, and Colorado’s income-based HEAR program is closed on the Front Range.
Who provides gas and electricity in Foxfield?
Electric: CORE Electric Cooperative. Gas: Xcel Energy. That matters because rebates, operating costs and who you call about a gas leak all depend on the utility.
Does Hytek serve my part of Foxfield?
Yes. We serve all of Foxfield (ZIP 80016). Call (303) 627-3395 or request service online.
Local data: U.S. Census Bureau (2025 population estimates; ACS 2020–2024 housing age), NOAA 1991–2020 climate normals, and city, county and utility program pages, checked September 2026. Rebates change; we confirm eligibility on your address when we quote.
Foxfield, CO
Need heat pump installation in Foxfield?
Flat-rate pricing, approved before work starts. Family-owned in Centennial since 2004.
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
New customers: get your furnace cleaned and checked for before the first cold snap. When it gets cold, everybody calls at once. Grab a spot now while the schedule is open.
var elementorFrontendConfig = {"environmentMode":{"edit":false,"wpPreview":false,"isScriptDebug":false},"i18n":{"shareOnFacebook":"Share on Facebook","shareOnX":"Share on X","pinIt":"Pin it","download":"Download","downloadImage":"Download image","fullscreen":"Fullscreen","zoom":"Zoom","share":"Share","playVideo":"Play Video","previous":"Previous","next":"Next","close":"Close","a11yCarouselPrevSlideMessage":"Previous slide","a11yCarouselNextSlideMessage":"Next slide","a11yCarouselFirstSlideMessage":"This is the first slide","a11yCarouselLastSlideMessage":"This is the last slide","a11yCarouselPaginationBulletMessage":"Go to slide"},"is_rtl":false,"breakpoints":{"xs":0,"sm":480,"md":768,"lg":1025,"xl":1440,"xxl":1600},"responsive":{"breakpoints":{"mobile":{"label":"Mobile Portrait","value":767,"default_value":767,"direction":"max","is_enabled":true},"mobile_extra":{"label":"Mobile Landscape","value":880,"default_value":880,"direction":"max","is_enabled":false},"tablet":{"label":"Tablet Portrait","value":1024,"default_value":1024,"direction":"max","is_enabled":true},"tablet_extra":{"label":"Tablet Landscape","value":1200,"default_value":1200,"direction":"max","is_enabled":false},"laptop":{"label":"Laptop","value":1366,"default_value":1366,"direction":"max","is_enabled":false},"widescreen":{"label":"Widescreen","value":2400,"default_value":2400,"direction":"min","is_enabled":false}},"hasCustomBreakpoints":false},"version":"4.2.3","is_static":false,"experimentalFeatures":{"e_font_icon_svg":true,"additional_custom_breakpoints":true,"container":true,"e_panel_promotions":true,"theme_builder_v2":true,"hello-theme-header-footer":true,"nested-elements":true,"global_classes_should_enforce_capabilities":true,"e_variables":true,"e_opt_in_v4_page":true,"e_components":true,"e_interactions":true,"e_widget_creation":true,"import-export-customization":true,"e_pro_atomic_form":true,"e_pro_collection_loop":true,"mega-menu":true,"e_pro_variables":true,"e_pro_interactions":true},"urls":{"assets":"https:\/\/hytekairsystems.com\/wp-content\/plugins\/elementor\/assets\/","ajaxurl":"https:\/\/hytekairsystems.com\/wp-admin\/admin-ajax.php","uploadUrl":"https:\/\/hytekairsystems.com\/wp-content\/uploads"},"nonces":{"floatingButtonsClickTracking":"cad20d7f2e","atomicFormsSendForm":"c8d7a87d44"},"swiperClass":"swiper","settings":{"page":[],"editorPreferences":[]},"kit":{"active_breakpoints":["viewport_mobile","viewport_tablet"],"global_image_lightbox":"yes","lightbox_enable_counter":"yes","lightbox_enable_fullscreen":"yes","lightbox_enable_zoom":"yes","lightbox_enable_share":"yes","lightbox_title_src":"title","lightbox_description_src":"description","hello_header_logo_type":"logo","hello_header_menu_layout":"horizontal","hello_footer_logo_type":"logo"},"post":{"id":3968,"title":"Heat%20Pump%20Installation%20Foxfield%2C%20CO%20-%20Hytek%20Air%20Systems","excerpt":"","featuredImage":false}};
//# sourceURL=elementor-frontend-js-before
var complianz = {"prefix":"cmplz_","debug":"","user_banner_id":"1","set_cookies":[],"block_ajax_content":"","banner_version":"10","version":"7.5.5","store_consent":"","do_not_track_enabled":"1","consenttype":"optin","region":"eu","geoip":"","dismiss_timeout":"","disable_cookiebanner":"","soft_cookiewall":"","dismiss_on_scroll":"","cookie_expiry":"365","url":"https://hytekairsystems.com/wp-json/complianz/v1/","locale":"lang=en&locale=en_US","set_cookies_on_root":"","cookie_domain":"","current_policy_id":"30","cookie_path":"/","categories":{"statistics":"statistics","marketing":"marketing"},"tcf_active":"","placeholdertext":"Click to accept {category} cookies and enable this content","css_file":"https://hytekairsystems.com/wp-content/uploads/complianz/css/banner-{banner_id}-{type}.css?v=10","page_links":{"eu":{"cookie-statement":{"title":"Cookie Policy ","url":"https://hytekairsystems.com/cookie-policy-eu/"}}},"tm_categories":"","forceEnableStats":"","preview":"","clean_cookies":"","aria_label":"Click to accept {category} cookies and enable this content","iapi_nav":"fallback"};
//# sourceURL=cmplz-cookiebanner-js-extra